Your direct line to us:
+49 2161 92683-0
HCP_Banner_en.png

Technical data of HCP

 


 

 

 


Mounting position HCP

 

HCP scrapers are  placed in the lower belt directly behind the discharge drum. The best mounting position is the position B (approximately 120-150 mm from A, where the conveyor belt leaves the contact with the drums), tighten and vibration-free belt guide provided.

HCP M1

Use our xeperience, especially when space is restricted and critical, sicky bulk material massive cleaning problems prepare, with varying materials, seasonal changes in material consistency, etc.

TOP

System sketch HCP

 

HCP S1

 

TOP

 Installation dimensions HCP

 

HCP E1

 

Measure A (installation variant A) when the springs are not under tension and without dead load/spring preload; standard with pressure spring (L=130 m); Measure A* (installation variant B); execution with pressure spring (L=60 mm); Measure A** (installation variant C) without pressure spring.

TOP

Installation dimensions/weights overview

 

Belt width (mm) QuantityxWidth of belt cleaner lamellas (mm) Standard Support tube-length (mm) D Support tube-Ø (mm) Lw (mm) A (mm) / A* (mm) / A** (mm) B (mm) CP (mm) Weigh tot. without Autom.1 (kg)
300/400 2 x 150 1300 60,3 450 290/220/170 170 166 13
500 3 x 150 1500 60,3 450 290/220/170 170 166 16
600/650 4 x 150 1600 60,3 450 290/220/170 170 166 19
800 5 x 150 1750 60,3 450 290/220/170 170 166 22
1000 6 x 150 1900 60,3 450 290/220/170 170 166 25
1200 7 x 150 2200 60,3 450 290/220/170 170 166 28
1200 8 x 150 2200 60,3 450 290/220/170 170 166 30
1400 9 x 150 2350 60,3 450 290/220/170 170 166 33
1600 10 x 150 2500 76,1 450 310/240/190 200 174 60
1800 11 x 150 2800 76,1 450 310/240/190 200 174 64t
1800 12 x150 2800 76,1 450 310/240/190 200 174 69
2000 13 x 150 2950 76,1 450 310/240/190 200 174 74
2400 14 x 150 3100 76,1 450 310/240/190 200 174 78
2400 15 x 150 3400 76,1 450 310/240/190 200 174 85
2400 15 x 150 3700 114,3 500 340/270/240 280 192 125
2600 16 x 150 3800 114,3 500 340/270/240 280 192 129
2800 17 x 150 4000 114,3 500 340/270/240 280 192 136

Weight/Automatic adjusting unit, complete with left- and right-sided mounting bracket: 12.5 kg (support tube-Ø =60.3 mm) / 16 kg (support tube-Ø =76.1 mm) / 23.5 kg  (support tube-Ø =114.3 mm)

TOP