Your direct line to us:
+49 2161 92683-0
HCM_Under-Pulley_Cleaner.png

Technical data of HCM

 


 

 

 


Mounting position HCM

 

HCM-3 scrapers are  placed in the lower belt directly behind the discharge drum. The best mounting position is the position B (approximately 120-150 mm from A, where the conveyor belt leaves the contact with the drums), tighten and vibration-free belt guide provided.

HCM M1

Use our xeperience, especially when space is restricted and critical, sicky bulk material massive cleaning problems prepare, with varying materials, seasonal changes in material consistency, etc.

TOP

System sketch HCM

 

HCM S1

 

TOP

 Installation dimensions HCM

 

HCM E1

 

Measure A (installation variant A) when the springs are not under tension and without dead load/spring preload; standard with pressure spring (L=130 m); Measure A* (installation variant B); execution with pressure spring (L=60 mm); Measure A** (installation variant C) without pressure spring


TOP

Installation dimensions/weights overview

 

Belt width (mm) QuantityxWidth of belt cleaner lamellas (mm) Standard support tube-length (mm) D Support tube-Ø (mm) Lw (mm) A (mm) / A* (mm) / A** (mm) B (mm) C3 (mm) Weight tot. without Autom.1 (kg)
300/400 2 x 150 1300 60,3 450 290/220/170 170 230 15
500 3 x 150 1500 60,3 450 290/220/170 170 230 20
600/650 4 x 150 1600 60,3 450 290/220/170 170 230 24
800 5 x 150 1750 60,3 450 290/220/170 170 230 28
1000 6 x 150 1900 60,3 450 290/220/170 170 230 30
1200 7 x 150 2200 60,3 450 290/220/170 170 230 33
1200 8 x 150 2200 60,3 450 290/220/170 170 230 38
1400 9 x 150 2350 60,3 450 290/220/170 170 230 42
1600 10 x 150 2500 76,1 450 310/240/190 200 238 70
1800 11 x 150 2800 76,1 450 310/240/190 200 238 75
1800 12 x150 2800 76,1 450 310/240/190 200 238 81
2000 13 x 150 2950 76,1 450 310/240/190 200 238 86
2400 14 x 150 3100 76,1 450 310/240/190 200 238 91
2400 15 x 150 3400 76,1 450 310/240/190 200 238 96
2400 15 x 150 3700 114,3 500 340/270/220 280 257 135
2600 16 x 150 3800 114,3 500 340/270/220 280 257 141
2800 17 x 150 4000 114,3 500 340/270/220 280 257 149

Weight/Automatic adjusting unit, complete with left- and right-sided mounting bracket: 12.5 kg (support tube-Ø =60.3 mm) / 16 kg (support tube-Ø =76.1 mm) / 23.5 kg  (support tube-Ø =114.3 mm)

TOP