Your direct line to us:
+49 2161 92683-0
HCHV_Banner_en.png

Technical data of HCHV

 


 

 

 


Mounting position HCHV

 

HCHV scrapers are  placed in the lower belt directly behind the discharge drum. The best mounting position is the position B (approximately 120-150 mm from A, where the conveyor belt leaves the contact with the drums), tighten and vibration-free belt guide provided.

HCHV M1

Use our xeperience, especially when space is restricted and critical, sicky bulk material massive cleaning problems prepare, with varying materials, seasonal changes in material consistency, etc.

TOP

System sketch HCHV

 

HCHV S1

 

TOP

Installation dimensions HCHV

 

HCHV E1

 

Measure A (installation variant A) when the springs are not under tension and without dead load/spring preload; standard with pressure spring (L=130 m); Measure A* (installation variant B); execution with pressure spring (L=60 mm); Measure A** (installation variant C) without pressure spring.

TOP

Installation dimensions / weights overview

 

Belt width
(mm)
QuantityxWidth of belt cleaner lamellas (mm) Standard Support tube-length (mm) D Support tube-Ø (mm) Lw (mm) A (mm) / A* (mm) / A** (mm) B (mm) Cv (mm) Weight tot. without Autom.1 (kg)'
1000 5 x 200 2000 76,1 450 310/240/190 200 178 74
1200 6 x 200 2200 76,1 450 310/240/190 200 178 83
1400 7 x 200 2500 76,1 450 310/240/190 200 178 91
1600 8 x 200 2800 76,1 450 310/240/190 200 178 103
1800 9 x 200 3000 76,1 450 310/240/190 200 178 112
2000 10 x 200 3200 76,1 450 310/240/190 200 178 120
2400 11 x 200 3500 76,1 450 310/240/190 200 178 130
2400 12 x 200 3500 76,1 450 310/240/190 200 178 135

Weight/Automatic adjusting unit, complete with left- and right-sided mounting bracket: 16 kg (support tube-Ø =76.1 mm); Special versions, such as with load stable HEA Support-profile on request.

TOP