Your direct line to us:
+49 2161 92683-0
HCD-II_DUAL_Underpulley-cleaner.png

Technical data of HCD-II

 


 

 

 


Mounting position HCD II

 

HCD II scrapers are  placed in the lower belt directly behind the discharge drum. The best mounting position is the position B (approximately 120-150 mm from A, where the conveyor belt leaves the contact with the drums), tighten and vibration-free belt guide provided.

Use our xeperience, especially when space is restricted and critical, sicky bulk material massive cleaning problems prepare, with varying materials, seasonal changes in material consistency, etc.

TOP

System sketch HCD II (Variant: Under Pulley cleaner -DUAL)

 

HCD II

TOP

Installation dimensions HCD II

 

 

Measure A (installation variant A) when the springs are not under tension and without dead load/spring preload; standard with pressure spring (L=130 m); Measure A* (installation variant B); execution with pressure spring (L=60 mm); Measure A** (installation variant C) without pressure spring.

TOP

Installations dimensions/weight overview

 

Belt width (mm) QuantityxWidth of belt cleaner lamellas (mm) Standard support tube-length (mm) support tube-Ø
D(mm)
A(mm)/
A*(mm)/
A**(mm)
B(mm) C(mm) Weight tot. without Autom.1 HCD II (kg)
400/500 HCD II: 4x200 1500 60,3 290/220/170 170 120 21
600/650 HCD II: 6x200 1600 60,3 290/220/170 170 120 26
800 HCD II: 8x200 1800 60,3 290/220/170 170 120 33
1000 HCD II: 10x200 2000 60,3 290/220/170 170 120 39
1200 HCD II: 12x200 2200 60,3 290/220/170 170 120 50
1400 HCD II: 14x200 2400 60,3 290/220/170 170 120 57
1600 HCD II: 16x200 2800 60,3 290/220/170 170 120 65
1800 HCD II: 18x200 3000 60,3 290/220/170 170 120 72
2000 HCD II: 20x200 3500 60,3 290/220/170 170 120 82
2200 HCD II: 22x200 3500 60,3 290/220/170 170 120 87
2400 HCD II: 24x200 3700 60,3 290/220/170 170 120 94

1Weigth/automatic adusting unit, complete with left- and rright-sided mounting bracket: recessed version A:12,5kg/ B:12,3kg/ C:11,8kg

TOP