Your direct line to us:
+49 2161 92683-0
HCD-I_Underpulley-cleaner.png

Technical Data of HCD-I

 

 

 


Mounting position HCD I

 

HCD I scrapers are  placed in the lower belt directly behind the discharge drum. The best mounting position is the position B (approximately 120-150 mm from A, where the conveyor belt leaves the contact with the drums), tighten and vibration-free belt guide provided.

Use our experience, especially when space is restricted and critical, sicky bulk material massive cleaning problems prepare, with varying materials, seasonal changes in material consistency, etc.

TOP

System sketch HCD I (Variant: Under-Pulley cleaner)

 

 HCD I

 

TOP

Installation dimensions HCD I

 

 

Measure A (installation variant A) when the springs are not under tension and without dead load/spring preload; standard with pressure spring (L=130 m); Measure A* (installation variant B); execution with pressure spring (L=60 mm); Measure A** (installation variant C) without pressure spring

TOP

Installation dimensions/weights overview

 

Belt width 
(mm)
Quantity x Width of cleaner blade (mm) Standard support tube-length(mm) Support tube-Ø D(mm) A(mm)/
A*(mm)/
A**(mm)
B(mm)


C(mm)


Weight tot. without Autom.1 HCD I (kg)
400/500 HCD I: 2x200 1500 60,3 290/220/170 170 120 16
600/650 HCD I: 3x200 1600 60,3 290/220/170 170 120 19
800 HCD I: 4x200 1800 60,3 290/220/170 170 120 23
1000 HCD I: 5x200 2000 60,3 290/220/170 170 120 27
1200 HCD I: 6x200 2200 60,3 290/220/170 170 120 36
1400 HCD I: 7x200 2400 60,3 290/220/170 170 120 41
1600 HCD I: 8x200 2800 60,3 290/220/170 170 120 48
1800 HCD I: 9x200 3000 60,3 290/220/170 170 120 52
2000 HCD I: 10x200 3500 60,3 290/220/170 170 120 59
2200 HCD I: 11x200 3500 60,3 290/220/170 170 120 63
2400 HCD I: 12x200  3700 60,3 290/220/170 170 120 68

1Weight/Automatic ajusting unit, complete with left- and right-sided mounting bracket: recessed version A: 12,5 kg / B: 12,3 kg / C: 11,8 kg

TOP